 |
Unplug the power cord from the
wall socket before touching any component. Use a grounded wrist strap or touch
a safely grounded object or metal object, such as the power
supply case, before handling components to avoid damaging
them due to static electricity Hold components by the edges to
avoid touching the ICs on them. Whenever you un-install any component,
place it on a grounded anti-static pad or in the bag that
came with the component. Before you install or remove any
component, ensure that the ATX power supply is switched off
or the power cord is detached from the power supply. Failure
to do so may cause severe damage to the motherboard, peripherals,
and/or components. Caution:
There is a risk of explosion if the battery is replaced by
an incorrect type. Dispose of used batteries according to
the instructions. |
