 |
Unplug
the power cord from the wall socket before touching any component. Use
a grounded wrist strap or touch a safely grounded object or
metal object, such as the power supply case, before handling
components to avoid damaging them due to static electricity Hold
components by the edges to avoid touching the ICs on them. Whenever
you un-install any component, place it on a grounded anti-static
pad or in the bag that came with the component. Before
you install or remove any component, ensure that the ATX power
supply is switched off or the power cord is detached from
the power supply. Failure to do so may cause severe damage
to the motherboard, peripherals, and/or components. Caution:
There is a risk of explosion if the battery is replaced by
an incorrect type. Dispose of used batteries according to
the instructions. |
