Final Power Connection Procedures

1. After all connections are made, close the system case cover.

2. Make sure that all switches are in the off position as marked by O.

3. Connect the power supply cord into the power supply located on the back of your system case as instructed by your system user’s manual.

4. Connect the power cord onto a power outlet that is equipped by a surge protector A controller to protect the computer and make up for variances in voltage. .

5. You may then turn on your devices in the following order:

6. The power LED on the front panel of the system case will light, as will the monitor A video display terminal. LED. The system will then run power-on tests. While the tests are running, additional messages will appear on the screen. If you do not see anything within 30 seconds from the time you turn on the power, the system may have failed a power-on test. Recheck your settings and connections or call Northern Micro for assistance.

7. During power-on, hold down the DEL key to enter BIOS BIOS, in computing, stands for basic input/output system. BIOS refers to the software code run by a computer when first powered on. The primary function of BIOS is to prepare the machine so other software programs stored on various media (such as hard drives, floppies, and CDs) can load, execute, and assume control of the computer. setup.