Risk of explosion if battery is replaced by an incorrect type. Dispose of batteries according to the manufacturer's instructions.
Electric current from power, telephone and communications cables can be hazardous. To avoid any shock hazard, disconnect all power cords and cables as described below:
Turn off the computer and all peripherals, such as monitors, printers and external devices.
Unplug all power cords from electrical outlets.
Disconnect all communications cords from external receptacles.
Disconnect all cables and power cords from the back panel of the computer.
Never remove the power supply cover. If you suspect a problem with this part, call Northern Micro service at 613-226-1117.
To keep the computer from being damaged, NEVER reconfigure the board while the power is ON.
If you wish to reconfigure the computer at any time, ensure that the power is turned OFF before changing any hardware settings, such as DIP switches or jumpers.
|
|